Temperature Sensors TSM-105, TSP-105, TXA-105, TXK-105, TZK-105

Temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZK-105 group 1 are designed for measuring the temperature of the surrounding environment, liquid, gaseous, and bulk chemically non-aggressive media in various industries. Temperature is the most common measured parameter, and overheating is one of the most negative factors in equipment operation, so there are many methods and places for applying temperature sensors. The principle of operation of resistance temperature detectors (RTDs) is based on the change in electrical resistance of conductors and semiconductors depending on temperature. The material used to manufacture such a sensor must have a high temperature coefficient of resistance, preferably a linear dependence of resistance on temperature, good reproducibility of properties, and inertness to environmental influences. Platinum best meets these properties; copper to a slightly lesser extent. Thermocouples are exclusively differential temperature sensors. They generate an electrical signal proportional to the temperature difference between two different points. Therefore, the junction used to measure the required temperature is called the "hot" junction, and the other unavoidable junction is called the "cold" junction. Resistance temperature detectors (temperature sensors) of group 1 are intended for measuring the temperature of the surrounding environment, liquid, gaseous, and bulk chemically non-aggressive media, as well as the surface of solid bodies in various industries. Classification of temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZK-105 REGMIK by type of measuring (sensitive) element - Resistance temperature detectors (thermometers): - Resistance temperature detectors TSM (sensor TSM) - Resistance temperature detectors TSP (sensor TSP) - Thermoelectric temperature detectors (thermocouples): thermocouples TXA thermocouples TXK thermocouples TZK Semiconductor converters — TP. Main technical characteristics of temperature sensors 105: Accuracy classes — A, B, C (for RTDs), 1, 2 (for TPs); SE connection scheme — two-, three-, four-wire; By SE type they are divided into resistance temperature detectors (50M, 100M, 50P, 100P, Pt100, Pt500, Pt1000, Pt2000, Pt10000), thermoelectric converters (thermocouples TXA (K), TXK (L), TZK), semiconductor (DS18B20); Protective fitting material — steel 12Kh18N10T; Protection degree against dust and water ingress — IP54; Resistance temperature detectors construction — non-detachable; Insulation resistance — not less than 100 MΩ. Temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZK-105 can be manufactured according to individual customer requirements.