30x100x11.8mm Bridge Glazing Packers are designed for glazing work where a wider bridge packer and a higher support point are needed inside the rebate. With a 30mm width and 100mm length, these BP30B bridge packers give installers a broad support area beneath the flat packer or sealed unit. The 8mm thickness provides more lift than lower-profile bridge packers, making this product useful where the glass needs to sit higher in the frame or where the rebate design calls for a deeper raised platform. The 11.8mm bridge profile helps create clearance beneath the support point, allowing the lower section of the rebate to remain open rather than being filled by a flat packer. This makes these packers suitable for drained and ventilated glazing systems where the support point must not interfere with the frame’s intended water-management route. Made from polypropylene, these bridge packers are rigid, moisture-resistant, and suitable for trade glazing installations. Why installers choose 30x100x11.8mm Bridge Glazing Packers: 30mm width provides a wide support platform 8mm thickness for higher glass positioning Useful where a 6mm bridge packer is not enough Helps support flat packers above the rebate base Suitable for wider glazing channels and larger sealed units Helps keep lower rebate space clear Polypropylene construction for firm installation support These BP30B bridge glazing packers are a useful option when the installation needs a wider 30mm bridge packer with additional height for a more substantial raised support point. What the 8mm Thickness is Used For 8mm – Higher Raised Support for Wider Rebate Systems Used where the glazing unit needs more lift than a standard low-profile bridge packer can provide. Best for: Wider glazing rebates Deeper support requirements Raising the sealed unit within the frame Pairing with wider flat glazing packers Window, door, conservatory, and curtain walling glazing work
