24x60mm Wedge Glazing Packers are compact tapered packers designed for installers who need fast, controlled wedging in 24mm glazing channels. The 60mm length makes these wedges easier to position in tighter areas compared with longer 80mm or 100mm wedge packers. They are useful when the glazed unit needs to be tightened inside the sash or frame, but there is limited room to work or only a local adjustment is required. The tapered shape allows the packer to slide into the gap and gradually take up space, helping reduce movement and improve the fit of the insulated glass unit. These wedges can be used during toe-and-heel work, sash adjustment, door alignment, and general glazing correction where the glass needs to sit securely before beading. Made from polypropylene, WP24A wedge packers are strong, moisture-resistant, and suitable for professional window and door glazing work. Why installers choose 24x60mm Wedge Glazing Packers: Compact 60mm length for easier fitting in restricted areas 24mm width suits common glazing systems and 24mm channels Helps tighten and stabilise the glass unit inside the frame Useful for toe-and-heel adjustment and sash correction Multiple taper options for fine, standard, and stronger wedging Helps reduce unwanted unit movement after positioning Polypropylene construction for reliable trade use These 24x60mm wedge glazing packers are a practical choice when installers need a compact 24mm wedge with a wide choice of taper ranges for different adjustment needs. What Each Taper is Used For 1-3mm – Fine Wedging & Small Gap Control Used where the gap is minimal and only a very light wedge action is required. Best for: Fine sash adjustment Small glazing gaps Minor movement reduction Light toe-and-heel correction Final positioning before beading 3-5mm – General Glazing Adjustment A practical everyday taper for standard wedging work. Best for: Routine glass tightening Standard unit stabilisation Door and sash adjustment Taking up common glazing gaps Correcting small-to-medium movement 4-6mm – Firmer Hold & Stronger Take-Up Used where the gap is more noticeable or the unit needs a stronger wedging action. Best for: Firmer support inside the sash or frame Larger adjustment points Stabilising opening sashes More positive toe-and-heel work Installations where 3-5mm is not enough 8-9.5mm – Heavy Wedging for Larger Gaps The deepest taper option in this range, used when a strong wedge is needed for larger spacing. Best for: Larger gaps in 24mm channels Heavy-duty unit stabilisation Stronger movement control Raising or tightening units more significantly Situations where lower taper options are too small
