24x100x7.5mm Bridge Glazing Packers are designed for glazing systems where installers need a higher bridge packer to build up the support point beneath the glass unit. Unlike thinner bridge packers used for shallow adjustments, this BP24A version has a 10mm thickness and a 24mm support width, making it useful where the insulated glass unit needs to be raised more substantially within the rebate. It can be used beneath flat glazing packers to create a stable setting point while helping avoid direct obstruction of drainage paths at the bottom of the frame. The 24mm width makes this bridge packer a natural match for many 24mm flat glazing packer applications, while the 100mm length gives a practical support bed for window and door glazing work. Made from polypropylene, these bridge packers provide firm, moisture-resistant support for professional installation use. Why installers choose 24x100x7.5mm Bridge Glazing Packers: 10mm thickness for deeper rebate build-up 24mm width works well with many 24mm flat packer setups Helps raise the glass support point inside the glazing rebate Supports flat glazing packers without sitting directly on the rebate base Useful where drainage and airflow need to remain open below the support point Suitable for window, door, conservatory, and curtain walling glazing Polypropylene construction for rigid, dependable support These BP24A bridge packers are a good option when a standard low-profile bridge packer is not enough and the installation needs a taller support platform inside the glazing rebate. What the 10mm Thickness is Used For 10mm – Deeper Rebate Build-Up & High Raised Support Used where the glazing unit needs a larger lift or the rebate requires a taller support platform before flat packers are added. Best for: Deeper glazing rebates Raising the glass support point Pairing with 24mm flat glazing packers Supporting sealed units in drained frame systems Installations where 3mm, 4mm, or 5mm bridge packers are not high enough
