10x100mm Wedge Glazing Packers are narrow tapered packers used when the installer needs extra length for controlled wedging inside the sash or frame. Compared with the 10x80mm version, these 100mm long wedge packers provide a longer contact area along the glazed unit. This can be useful where the unit needs more even wedging pressure, better stability, or a longer support surface during adjustment. The tapered design allows the packer to be inserted into the glazing gap to gradually tighten the unit into position. This makes these packers useful for reducing unwanted movement, improving glass positioning, and helping with toe-and-heel work on doors, sashes, and other glazed units. Made from polypropylene, WP10B wedge packers are durable, moisture-resistant, and suitable for professional glazing installation work. Why installers choose 10x100mm Wedge Glazing Packers: Longer 100mm profile for more contact than 80mm wedges Slim 10mm width for narrow glazing channels Helps tighten and stabilise insulated glass units Useful for toe-and-heel adjustment work Helps take up movement inside the sash or frame Polypropylene construction for firm wedging support These 10x100mm wedge glazing packers are a good choice where a slim wedge is needed, but the installer wants a longer support length for better control during adjustment. What Each Taper is Used For 2-4mm – Light Wedging & Fine Control Used where the glazing gap is small and the unit only needs gentle tightening. Best for: Fine glass positioning Light sash adjustment Minor movement reduction Toe-and-heel fine-tuning Narrow channels needing a longer wedge 4-6mm – Firmer Wedging & Stronger Take-Up Used where the gap is larger or the unit needs a more positive wedging action. Best for: More noticeable gap take-up Firmer unit stabilisation Door and sash adjustment work Reducing movement in the glazed unit Installations where a 2-4mm taper is too light
